M800VW/M80VW Series Connection and Setup Manual
7 Connection of Control Unit
7.6 Connecting with Remote I/O Unit
7.6 Connecting with Remote I/O Unit
Connect the remote I/O unit to RIO1 or RIO2 connector of the control unit.
Control unit
RIO3
RIO1
RIO2
Note
(1) Connect the J210 cable to the RIO1, RIO2, or RIO3 connector of the control unit.
Check the connector position with the actual machine.
[Related items]
Cable drawing: "18.2.15 J210 Cable"
Connector pin assignment: "General Specifications: Control Unit" (RIO1 connector, RIO2 connector, RIO3 connector)
IB-1501612-C
Remote I/O 3ch
J210
Remote I/O 1ch
J210
Remote I/O 2ch
J210
244
Remote I/O unit
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points