M800VW/M80VW Series Connection and Setup Manual
11 Connection of Remote I/O Unit
11.7 Connecting with Machine Control Signal (FCU8-DX213/FCU8-DX213-1/FCU8-DX654/FCU8-DX654-1)
Mounting the wire
(1) Insert a slotted screwdriver (blade width: 2.5 mm).
(2) Insert the wire and then pull the screwdriver out.
(2)
(1)
Mounting the connector
(1) Push the connector to the lock lever position.
(2) Push the right and left lock levers up simultaneously.
Removing the connector
(1) Push the right and left lock levers down simultaneously.
(2) Release the lock and pull the connector out.
IB-1501612-C
308