J395 Cable - Mitsubishi Electric M800VW Series Connection And Set Up Manual

Hide thumbs Also See for M800VW Series:

Table of Contents

M800VW/M80VW Series Connection and Setup Manual

18.3 Cable Relating to Drive Unit

18.3.9 J395 Cable

Max. cable length: 10 m

Application: Optical communication cable

for wiring between drive units (outside panel)

for wiring between NC-drive units

Use when wiring outside of the panel with a cable of 10 m or less.

Connector: LGP-Z0007PK

Manufacturer: HONDA TSUSHIN KOGYO

2-core cable (section with reinforced sheath)

2-core cable (section without reinforced sheath)

(1) Binding the cables too tightly with tie-wraps could result in an increased loss or a disconnection. Use a cushioning mate-

rial such as a sponge or rubber when bundling the cables and fix so that the cables do not move. (Clamp material for ref-

erence: KITAGAWA INDUSTRIES CKN-13SP)

(2) Never bundle the cables with vinyl tape. The plasticizing material in the vinyl tape could cause the POF cable to break.

(3) Loop the excessive cable with twice or more than the minimum bending radius.

IB-1501612-C

Wire material: PFDU-CL1002-22E60VT

Manufacturer: TORAY

Minimum bending radius: R