Table of Contents
Advertisement
This manual describes the items required for installing, connecting and setting up the Mitsubishi Electric CNC.
Read this manual thoroughly and understand the product's functions and performance before use.
Supported models of this manual are as follows:
Supported models
M800VW Series
M80VW Series
Abbreviations for model names used in this manual are as follows:
Abbreviations
M800V, M800V Series
M80V, M80V Series
M800V/M80V, M800V/M80V Series
M8V, M8V Series
To safely use this CNC unit, thoroughly study the "Precautions for Safety" before use.
Be sure to keep this manual always at hand.
Also refer to the manuals on "Manual List" as necessary.
Notes on reading this manual
(1) This manual is written on the assumption that all optional functions are added, but the actually delivered device may not
have all functions.
The unit names, cable names and various specifications are subject to change without notice. Please confirm these
before placing an order.
(2) This manual explains general parameters which are operated on the CNC side.
For information about each machine tool, refer to manuals issued from the machine tool builder.
If the descriptions relating to "restrictions" and "allowable conditions" conflict between this manual and the machine tool
builder's instruction manual, the later has priority over the former.
(3) This manual is intended to contain as much descriptions as possible even about special operations.
The operations to which no reference is made in this manual should be considered "impossible".
(4) The "special display unit" explained in this manual is the display unit incorporated by the machine tool builder, and is not
the Mitsubishi Electric standard display unit.
(5) This manual is for the machine tool builders who set up the CNC system.
(6) The control unit for M80VW is mainly used as a control unit to explain the connection, etc. in the drawings on this manual.
(7) Do not connect to the pin described as "NC" on the pin assignment table of the connector.
(8) The characteristic values and numerical values without tolerances mentioned in this manual are representative values.
Introduction
Abbreviations in this manual
M850VW, M830VW
M80VW
M800VW Series
M80VW Series
M800VW Series/M80VW Series
M800VW Series/M80VW Series
Supported models
Advertisement
Table of Contents
