NetApp StorageGRID SG6000 Manual page 79

• The management client is using a
Steps
1. Enter the URL for the BMC interface:
https://BMC_Port_IP
For BMC_Port_IP, use the DHCP or static IP address for the BMC management port.
The BMC sign-in page appears.
If you haven't yet configured BMC_Port_IP, follow the instructions in
interface
and have not yet configured a BMC IP address, you might still be able to access the BMC.
By default, the BMC obtains an IP address using DHCP. If DHCP is enabled on the BMC
network, your network administrator can provide the IP address assigned to the BMC MAC,
which is printed on the label on the front of the SG6000-CN controller. If DHCP is not
enabled on the BMC network, the BMC will not respond after a few minutes and assign itself
the default static IP 192.168.0.120. You might need to connect your laptop directly to the
BMC port, and change the networking setting to assign your laptop an IP such as
192.168.0.200/24, in order to browse to 192.168.0.120.
2. Enter the root username and password, using the password you set when you
password:
3. Select Sign me in.
supported web
(SG6000). If you are unable to follow that procedure due to a hardware problem,
browser.
Configure BMC
changed the default root
77