NetApp StorageGRID SG6000 Manual page 152

Do not attach the front bezel until after you power on the controller.
2. Tighten the captive screws on the controller front panel to secure the controller in the rack.
3. Wrap the strap end of the ESD wristband around your wrist, and secure the clip end to a metal ground to
prevent static discharge.
4. Reconnect the controller data cables and any SFP+ or SFP28 transceivers.
To prevent degraded performance, do not twist, fold, pinch, or step on the cables.
Cable appliance (SG6000)
5. Reconnect the controller power cables.
Connect power cords and apply power (SG6000)
After you finish
The controller can be restarted.
Power on SG6000-CN controller and verify operation
150