NetApp StorageGRID SG6000 Manual page 145

Use the BMC interface to monitor start-up status.
2. Confirm that the appliance controller displays in the Grid Manager and with no alerts.
It might take up to 20 minutes for the controller to display in the Grid Manager.
3. Confirm that the new SG6000-CN controller is fully operational:
a. Log in to the grid node using PuTTY or another ssh client:
i. Enter the following command:
ii. Enter the password listed in the
iii. Enter the following command to switch to root:
iv. Enter the password listed in the
When you are logged in as root, the prompt changes from
b. Enter the following command and verify that it returns the expected output:
cat /sys/class/fc_host/*/port_state
Expected output:
ssh admin@grid_node_IP
file.
Passwords.txt
su -
file.
Passwords.txt
$ to #.
143