NetApp StorageGRID SG6000 Manual page 122

In this example:
▪ The drive firmware revision is MS02.
▪ The drive identifier is KPM51VUG800G.
Select View drives in the Associated Drives column to display where these drives are installed in your
storage appliance.
d. Close the Upgrade Drive Firmware window.
4. Download and prepare the available drive firmware upgrade:
a. Under Drive Firmware upgrade, select NetApp Support.
b. On the NetApp Support web site, select the Downloads tab, and then select E-Series Disk Drive
Firmware.
The E-Series Disk Firmware page displays.
c. Search for each Drive Identifier installed in your storage appliance and verify that each drive identifier
has the latest firmware revision.
▪ If the firmware revision is not a link, this drive identifier has the latest firmware revision.
▪ If one or more drive part numbers are listed for a drive identifier, a firmware upgrade is available for
these drives. You can select any link to download the firmware file.
120