NetApp StorageGRID SG6000 Manual page 57

5. When you are satisfied with your selections, click Save.
You might lose your connection if you made changes to the network or link you are
connected through. If you are not reconnected within 1 minute, re-enter the URL for the
StorageGRID Appliance Installer using one of the other
appliance:
Configure StorageGRID IP addresses
You use the StorageGRID Appliance Installer to configure the IP addresses and routing
information used for the appliance Storage Node on the StorageGRID Grid, Admin, and
Client Networks.
About this task
https://SG6000-CN_Controller_IP:8443
IP addresses assigned to the
55