NetApp StorageGRID SG6000 Manual page 100

StorageGRID Installation API
The StorageGRID Installation API is only available when you are initially configuring your StorageGRID
system, and in the event that you need to perform a primary Admin Node recovery. The Installation API can be
accessed over HTTPS from the Grid Manager.
To access the API documentation, go to the installation web page on the primary Admin Node and select Help
> API Documentation from the menu bar.
The StorageGRID Installation API includes the following sections:
• config — Operations related to the product release and versions of the API. You can list the product
release version and the major versions of the API supported by that release.
• grid — Grid-level configuration operations. You can get and update grid settings, including grid details, Grid
Network subnets, grid passwords, and NTP and DNS server IP addresses.
• NODES — Node-level configuration operations. You can retrieve a list of grid nodes, delete a grid node,
configure a grid node, view a grid node, and reset a grid node's configuration.
• provision — Provisioning operations. You can start the provisioning operation and view the status of the
provisioning operation.
• recovery — Primary Admin Node recovery operations. You can reset information, upload the Recover
Package, start the recovery, and view the status of the recovery operation.
• recovery-package — Operations to download the Recovery Package.
• sites — Site-level configuration operations. You can create, view, delete, and modify a site.
StorageGRID Appliance Installer API
The StorageGRID Appliance Installer API can be accessed over HTTPS from Controller_IP:8443.
To access the API documentation, go to the StorageGRID Appliance Installer on the appliance and select Help
> API Docs from the menu bar.
The StorageGRID Appliance Installer API includes the following sections:
• clone — Operations to configure and control node cloning.
• encryption — Operations to manage encryption and view encryption status.
• hardware configuration — Operations to configure system settings on attached hardware.
• installation — Operations for starting the appliance installation and for monitoring installation status.
• networking — Operations related to the Grid, Admin, and Client Network configuration for a StorageGRID
appliance and appliance port settings.
• setup — Operations to help with initial appliance installation setup including requests to get information
about the system and update the primary Admin Node IP.
• SUPPORT — Operations for rebooting the controller and getting logs.
• upgrade — Operations related to upgrading appliance firmware.
• uploadsg — Operations for uploading StorageGRID installation files.
98