NetApp StorageGRID SG6000 Manual page 39

Do not attach the front bezel until after you power on the controller.
5. Tighten the captive screws on the controller front panel to secure the controller in the rack.
Cable appliance (SG6000)
You must connect the storage controllers to the SG6000-CN controller, connect the
management ports on all three controllers, and connect the network ports on the
SG6000-CN controller to the Grid Network and optional Client Network for StorageGRID.
What you'll need
• You have the four optical cables provided with the appliance for connecting the two storage controllers to
the SG6000-CN controller.
• You have RJ-45 Ethernet cables (four minimum) for connecting the management ports.
• You have one of the following options for the network ports. These items are not provided with the
appliance.
◦ One to four TwinAx cables for connecting the four network ports.
37