Prepare For Installation (Sg6000) - NetApp StorageGRID SG6000 Manual

Task
Deploying an appliance Storage Node as part of a
Storage Node recovery operation
Related information

Prepare for installation (SG6000)

Install hardware (SG6000)
Configure hardware (SG6000)
Expand your grid
Recover and maintain
Administer StorageGRID
Prepare for installation (SG6000)
Preparing to install a StorageGRID appliance entails preparing the site and obtaining all
required hardware, cables, and tools. You should also gather IP addresses and network
information.
Related information
Web browser requirements
Prepare site (SG6000)
Before installing the appliance, you must make sure that the site and the cabinet or rack
you plan to use meet the specifications for a StorageGRID appliance.
Steps
1. Confirm that the site meets the requirements for temperature, humidity, altitude range, airflow, heat
dissipation, wiring, power, and grounding. See the NetApp Hardware Universe for more information.
2. Confirm that your location provides 240-volt AC power for the SG6060 or 120-volt AC power for the
SGF6024.
3. Obtain a 19-inch (48.3-cm) cabinet or rack to fit shelves of this size (without cables):
Type of shelf
E2860 controller
shelf for SG6060
14
Height Width
6.87 in. 17.66 in.
(17.46 cm) (44.86 cm)
Instructions
Instructions for recovery and maintenance
Depth
38.25 in.
(97.16 cm)
Maximum weight
250 lb.
(113 kg)