NetApp StorageGRID SG6000 Manual page 71

4. Configure hardware alerts.
a. Select Help to access the online help for SANtricity System Manager.
b. Use the Settings > Alerts section of the online help to learn about alerts.
c. Follow the "How To" instructions to set up email alerts, SNMP alerts, or syslog alerts.
5. Manage AutoSupport for the components in the storage controller shelf.
a. Select Help to access the online help for SANtricity System Manager.
b. Use the SUPPORT > Support Center section of the online help to learn about the AutoSupport
feature.
c. Follow the "How To" instructions to manage AutoSupport.
For specific instructions on configuring a StorageGrid proxy for sending E-Series AutoSupport
messages without using the management port, go to the
settings.
6. If the Drive Security feature is enabled for the appliance, create and manage the security key.
a. Select Help to access the online help for SANtricity System Manager.
b. Use the Settings > System > Security key management section of the online help to learn about
Drive Security.
c. Follow the "How To" instructions to create and manage the security key.
7. Optionally, change the administrator password.
a. Select Help to access the online help for SANtricity System Manager.
b. Use the Home > Storage array administration section of the online help to learn about the
administrator password.
instructions for configuring storage proxy
69