NetApp StorageGRID SG6000 Manual page 78

4. Optionally, set a static IP address for the BMC management port.
You should either assign a static IP for the BMC management port or assign a permanent
lease for the address on the DHCP server.
a. Select Static.
b. Enter the IPv4 address, using CIDR notation.
c. Enter the default gateway.
d. Click Save.
It might take a few minutes for your changes to be applied.
Access BMC interface
You can access the BMC interface on the SG6000-CN controller using the DHCP or static
IP address for the BMC management port.
What you'll need
• The BMC management port on the SG6000-CN controller is connected to the management network you
plan to use.
76