Steering Wheel / Hub Adapter Removal; Steering Wheel Removal; Hub Adapter Removal - Polaris RZR XP Service Manual

STEERING / SUSPENSION
STEERING WHEEL / HUB ADAPTER
REMOVAL

STEERING WHEEL REMOVAL

1. Remove the steering wheel fasteners and remove the
steering wheel.

HUB ADAPTER REMOVAL

1. Remove upper steering shaft, and pivot tube as an
assembly before attempting to remove the hub
adapter. Refer to Upper Steering Shaft Removal page
8.5.
CAUTION
Striking the steering wheel or steering shaft while
installed on the vehicle can permanently damage the
EPS unit, and cause a power steering fault.
q
2. Loosen the nut and back it half way off the steering
shaft.
3. Place the assembly in a vise.
8.6
4. Using a large bronze drift and hammer, strike the
steering shaft nut to pop the hub adapter
shaft taper.
5. Once the hub adapter pops loose, completely remove
the nut and lift the hub adapter off the shaft.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
w
off the
© Copyright Polaris Industries Inc.