Interior hardware and consumables
The following figure illustrates the interior of the Ion Chef
involved in the preparation of chips for sequencing on an Ion S5
™
Ion GeneStudio
New pipette tips – The position of the rack containing unused pipette tips.
1
Automated heated cover – Transfers the plate cover to the PCR reaction plate within the sample block. During
2
thermal cycling, the heated cover applies compression to seal the reaction plate and heats the cover to prevent
condensation.
Waste pipette tip rack – The position of the rack containing waste (used) pipette tips.
3
Thermal cycler sample block – Performs thermal cycling of the sequencing reactions on a 96-well PCR reaction
4
plate.
Reagents station – The position on the instrument deck of the diluted libraries, NaOH, and the Ion S5
5
Reagents cartridge.
Solutions station – The position on the instrument deck of the Ion S5
6
at room temperature.
Recovery centrifuges – Twin stations that perform centrifugation of the ISPs during the recovery phase of template
7
preparation.
Enrichment station – The position of the rack containing consumables for the enrichment of the template-positive
8
ISPs.
Chip-loading centrifuge – Performs centrifugation of the sequencing chip that has been mounted to a chip-loading
9
adapter and loaded with template-positive ISPs, and a chip balance loaded opposite to the sequencing chip.
Ion 520
™
& Ion 530
™
ExT Kit − Chef User Guide
S5 Series Sequencer.
1
2
3
4
5
6
7
8
9
10
11 12
A
B
C
D
E
F
G
H
Chapter 1 Product information
About the Ion Chef
™
Instrument and describes the stations
™
Sequencer, Ion S5
™
Chef Solutions cartridge, which is maintained
1
™
System
™
XL Sequencer, or
™
ExT Chef
11