Thermo Scientific Ion 520 User Manual page 51

5. Confirm that the remaining pre-populated settings are correct, or tap Edit to make changes if
needed.
6. Ensure that the instrument door is closed, then tap Start run to start the sequencing run.
IMPORTANT! During a run, do not open the instrument door, and avoid touching the instrument.
Touching the instrument during the sequencing run can reduce the quality of the measurements.
When the sequencing run is complete, the instrument automatically performs the cleaning
procedure unless the Post-Run/Clean checkbox was deselected. After cleaning, the touchscreen
returns to the main menu. Review the results with Torrent Suite
Ion 520 ™ & Ion 530 ™ ExT Kit − Chef User Guide
Chapter 6 Start the sequencing run
Start the sequencing run
™
Software.
6
51