4
■
Materials required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
■
Dilute the library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
■
Prepare the consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
■
■
■
■
This chapter describes how to perform the following procedures:
• Set up the Ion Chef
of the required reagents and consumables
• Start an Ion Chef
• Unload the chips for sequencing
Materials required
™
• Ion 520
& Ion 530
• Ion 520
™
Chip or Ion 530
• Library or combined library stock solution
• Molecular-biology grade nuclease-free water
• P200 pipettor and filtered tips
• Waste container
Dilute the library
Sample libraries are quantified at the end of the library preparation workflow and are typically diluted
to a concentration of 100 pM. The Ion Library Equalizer
concentration to 100 pM. Libraries may require further dilution before use in Ion Chef
24
™
™
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
™
run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
™
Instrument for use by diluting the libraries, and loading the instrument with all
™
run
™
ExT Kit - Chef (Cat. No. A30670)
™
Chip
Start the Ion Chef
™
Kit procedure also normalizes library
Ion 520
™
™
template runs.
™
& Ion 530
™
ExT Kit − Chef User Guide
run