Confirm That Consumables Are Correctly Installed - Thermo Scientific Ion 520 User Manual

Confirm that consumables are correctly installed

• Confirm that each cartridge is at the correct location and in the correct orientation.
• Press down on all cartridges to confirm that they are firmly pressed into place.
• Confirm that all tubes in the Ion S5
Position C, are uncapped and firmly pressed into place.
• Confirm that the centrifuge lids are installed correctly so that the port is oriented toward the rear of
the instrument.
• Confirm that the tube and chip buckets are seated securely in the rotor arms of the Chip-loading
and Recovery centrifuges, and that the consumables they contain are correctly installed.
CAUTION! To ensure correct and safe instrument operation, you must confirm that all consumables
are installed correctly to the deck before you start a run. The Ion Chef
aspects of the consumable setup before beginning each run.
Ion 520 ™ & Ion 530 ™ ExT Kit − Chef User Guide
™
ExT Chef Reagents cartridge, including the tube of NaOH in
Chapter 4 Start the Ion Chef
™
Load the Ion Chef System
™
Instrument does not verify all
™ run
4
35