B&R Automation PC 3100 User Manual page 95

2.3.5.10.3.1 Pinout
LEDs are integrated on the interface option.
Controller
Wiring
Transfer rate
Cable length
LED "Speed"
Green
Orange (light)
LED "Link"
Orange (light) Link (a connection to an
Ethernet network exists)
1) The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the
numbering used by the respective operating system, however.
2) Switching takes place automatically.
3) The 10 Mbit/s transfer rate / connection is only available if LED "Link" is active at the same time.
2.3.5.10.3.2 Driver support
A special driver is required to operate Intel Ethernet controller I210. Drivers for approved operating systems are
available for download in the Downloads section of the B&R website (www.br-automation.com). Windows 7, Win-
dows 10 and B&R Linux are approved operating systems.
Wake-on-LAN (WoL) and PXE boot are not supported.
Information:
Necessary drivers must be downloaded from the B&R website, not from manufacturer websites.
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
Ethernet interface (ETH
Intel I210
S/STP (Cat 5e)
10/100/1000 Mbit/s
2)
Max. 100 m (min. Cat 5e)
On Off
100 Mbit/s 10 Mbit/s
1000 Mbit/s -
On Off
Activity (blinks) (data
is being transferred)
Table 114: 5AC901.IETH-00 - Ethernet interface
)
1)
3)
Technical data
RJ45, female
1
95