Automation Runtime; General Information; Order Data; Automation Runtime Windows (Arwin) - B&R Automation PC 3100 User Manual

4.5 Automation Runtime

4.5.1 General information

The Automation Runtime real-time operating system is an integral part of Automation Studio. This real-time oper-
ating system makes up the software kernel that allows applications to run on a target system.
• Guarantees the highest possible performance for the hardware used
• Runs on all B&R target systems
• Makes the application hardware-independent
• Easy portability of applications between B&R target systems
• Guaranteed determinism through cyclic system
• Configurable jitter tolerance in all task classes
• Support for all relevant programming languages, such as IEC 61131-3 languages and C
• Rich function library per IEC 61131-3 and additionally the extended B&R Automation Library
• Integrated in Automation NET. Access to all networks and bus systems via function calls or by configuration
in Automation Studio™
B&R Automation Runtime is fully embedded in the corresponding target system (hardware on which Automation
Runtime is installed). It thus enables application programs to access I/O systems (also via the fieldbus) and other
devices such as interfaces and networks.

4.5.2 Order data

Model number Short description
Technology Guard
0TG1000.01 Technology Guard (MSD)
0TG1000.02 Technology Guard (HID)
1TG4600.10-5 Automation Runtime Windows TG license
1TG4601.06-5 Automation Runtime Embedded TG license
Table 218: 0TG1000.01, 0TG1000.02, 1TG4600.10-5, 1TG4601.06-5 - Order data

4.5.3 Automation Runtime Windows (ARwin)

System requirements
The following software versions (or higher) are required to operate Automation Runtime Windows on an Automation
PC 3100:
• ARwin Upgrade uR E4.34
• Automation Studio V4.3.4
• Technology Guard
Information:
In order to use Automation Runtime Windows (ARwin), BIOS setting Advanced - OEM features - Real-
time environment must be set to Enabled.

4.5.4 Automation Runtime Embedded (ARemb)

System requirements
The following software versions (or higher) are required to operate Automation Runtime Embedded on an Automa-
tion PC 3100:
• ARemb upgrade AR E4.34
• Automation Studio V4.3.4
• Visual Components Runtime (VC) V4.34
• Technology Guard
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
Software
Figure
193