Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.

Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the

product family.

6.5.4.1.4 Bend radius specification

Connector

Bend radius

Connector - Ferrite bead

236

5CASDL.

0018-03

0050-03

1.8 m ± 20 mm

5 m ± 45 mm

10 m ± 90 mm 15 m ± 135 mm 20 m ± 180 mm 25 m ± 225 mm 30 m ± 270 mm

≥15x cable diameter (from ferrite bead to ferrite bead)

Flexible, applies from ferrite bead to ferrite bead (tested 300000 cycles at 15x cable diameter, 4800 cycles/hour)

Approx. 460 g

Approx. 1020 g Approx. 1940 g Approx. 2840 g Approx. 3740 g Approx. 4560 g Approx. 5590 g

Ferrite bead

Figure 82: Bend radius specification

Automation PC 3100 User's manual V 1.00 Translation of the original documentation

5CASDL.

0100-03

0150-03

0200-03

1 kV

0.5 kV

100 ± 10 Ω

≤95 Ω/km

≤145 Ω/km

>200 MΩ/km

Pollution degree 2

UL AWM 20236 80°C 30 V

Per UL 758 (cable vertical flame test)

Per VDE 0282-10

-20 to 80°C

-5 to 60°C

Max. 12 mm

≥3.5x cable diameter

300,000

4800 cycles/hour

180 mm, 15x cable diameter

460 mm

≤50 N

≤400 N

Ferrite bead

Bend radius

Ferrite bead - Ferrite bead

5CASDL.

0250-03

0300-03

Ferrite bead

Table of Contents

This manual is also suitable for:

Apc3100 5apc3100.kbu0-000 5apc3100.kbu1-000 5apc3100.kbu2-000 5apc3100.kbu3-000

B&R Automation PC 3100 User Manual page 236

Related Manuals for B&R Automation PC 3100

Related Products for B&R Automation PC 3100

This manual is also suitable for:

Table of Contents