Product Information - B&R Automation PC 3100 User Manual

2.2.5 Product information

Each B&R device is assigned a device number with a unique serial number and barcode (type 128) to enable
unique identification of the device. The product information includes additional data such as product family, power
data, certifications, safety notices, license adhesive labels and a field for customer information.
(1)
(3)
(2)
(4)
(5)
(6)
No. Label
1 Company logo, product family, power data
2 Identification
3 Certifications
4 Safety notices
5 License adhesive label
6 Customer information
All components installed in the system (serial number, material number, revision, delivery date and end
of warranty) are indicated in the device number. This information can be retrieved from the B&R website
(www.br-automation.com) with the device serial number. After the search, a detailed list of the installed compo-
nents is displayed.
1 The device number is shown here.
2 The serial number of the device is shown here.
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
Automation PC 3100
Input: 24 VDC / 1 .. 5.5 A
Fuse: 65 VDC / 15 A
5SXXXXXXXXXXXX-xxx
ED150168421 Made in Austria
B&R I 5142 Eggelsberg I AUSTRIA XXXXXXXXXXXX XXXXXXXXXXXX
XXXXXXXXXXXX XXXXXXXXXXXX
ETH1: 00-E0-48-40-9F-87 XXXXXXXXXXXX XXXXXXXXXXXX
XXXXXXXXXXXX XXXXXXXXXXXX
ETH2: 00-E0-48-40-9F-88
XXXXXXXXXXXX XXXXXXXXXXXX
XXXXXXXXXXXX
ETH3: 00-E0-48-40-9F-87
XXXXXXXXXXXX
ETH4: 00-E0-48-40-9F-88
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX Use only non-incendive USB
XXXXXXXXXXXX
devices as described in the
XXXXXXXXXXXX
user manual. Surrounding air
temp.: see user manual
Type 4X indoor use only
Do not remove or insert CFast device
or open housing while power is on!
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
Lizenz-
accept any interference received,
including interference that may cause
sticker
undesired operation.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Explanation
Contains the name of the product family, company logo and information about the power data
of the device.
Contains the device number with unique serial number and barcode of the device, country of
production, company address and MAC addresses of the installed Ethernet interfaces.
The number of MAC addresses may vary depending on the configuration.
Contains all standards and certifications valid for the complete system.
These may vary depending on the device configuration.
Contains safety notices for the complete system.
These may vary depending on the device configuration.
The license adhesive label for operating systems depends on the selected operating system and
is not available for all configurations.
Space for possible customer information. This must be defined already during device configura-
tion. Subsequently changing or adding this customer information is not possible.
Table 20: Product information
Table 21: Identification
5SXXXXXXXXXXXX-xxx
(1)
ED150168421
B&R I 5142 Eggelsberg I AUSTRIA
ETH1: 00-E0-48-40-9F-87
(2)
ETH2: 00-E0-48-40-9F-88
ETH3: 00-E0-48-40-9F-87
ETH4: 00-E0-48-40-9F-88
Technical data
Made in Austria
35