B&R Automation PC 3100 User Manual page 173

BIOS parameter
EFI device first
Timeout
Automatic failover
EFI
Legacy
1) When changing the ACPI version, make sure that the operating system used is compatible.
4.1.7.5.1 EFI
BIOS parameter
EFI
1st device
2nd device
1)
3rd device
4th Device
5th device
6th device
7th device
8th device
1) Starting with the 2nd device, only the respective default values are specified.
4.1.7.5.1.1 EFI
BIOS parameter
EFI
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
Setting options Description
Enabled
Disabled Disables/Enables EFI device first
Enable to boot EFI devices before legacy devices. Disable to boot legacy devices before
Enabled
EFI devices.
INT Delay time until the boot list is processed [s].
Default: 0 Range: 0 to 10
Disabled Disables/Enables automatic failover
Enabled
Enter Opens submenu
Enter Opens submenu
Table 203: Boot
Setting options Description
Enter Opens submenu
CFast 1 Selects this device as first in the boot order
CFast 2
ETH1 IPv4
ETH1 IPv6
USB storage
Internal EFI shell
Other
M.2
USB CD-ROM
USB other
RAID volume
Disabled
CFast 2 Selects this device as second in the boot order
Selects this device as third in the boot order
M.2
USB storage Selects this device as fourth in the boot order
USB CD-ROM Selects this device as fifth in the boot order
USB other Selects this device as sixth in the boot order
Internal EFI shell Selects this device as seventh in the boot order
Selects this device as eighth in the boot order
ETH1 IPv4
Table 204: Boot - EFI
Setting options
Enter, then:
► Keyboard: F5/F6
► Touch screen: Move items at
the gray arrows
Table 205: Boot - EFI - EFI
"EFI" on page 173
"Legacy" on page 174
"EFI" on page 173
Description
Defines the boot order
Software
173