Graphics Options; 5Accli02.Dpo0-000 - B&R Automation PC 3100 User Manual

Technical data

2.3.4 Graphics options

Information:
Graphics options can only be operated in the IF option 3 slot.
Information:
For information about replacing or installing a graphics option, see section
option and DDR4 SDRAM" on page
After installation or replacement, it may be necessary to load the defaults settings in BIOS
on page 175).

2.3.4.1 5ACCLI02.DPO0-000

2.3.4.1.1 General information
Graphics option 5ACCLI02.DPO0-000 is equipped with a DisplayPort and USB 2.0 interface.
• DisplayPort interface
• USB 2.0 interface
• Compatible with APC3100/PPC3100
2.3.4.1.2 Order data
Model number Short description
Graphics options
5ACCLI02.DPO0-000 Graphics option - 1x DisplayPort transmitter (version 1.2) - For
APC3100/PPC3100
2.3.4.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
General information
B&R ID code
Certifications
CE
UL
HazLoc
Interfaces
USB
Quantity
Type
Design
Transfer rate
Current-carrying capacity
DisplayPort
Quantity
Version
62
254.
Table 49: 5ACCLI02.DPO0-000 - Order data
Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s)
Table 50: 5ACCLI02.DPO0-000 - Technical data
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
5ACCLI02.DPO0-000
0xEEE6
Yes
cULus E115267
Industrial control equipment
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1
USB 2.0
Type A
Max. 05 A
1
1.2
"Installing the interface
(see "Exit"
Figure
1)