Dnv Gl Certification - B&R Automation PC 3100 User Manual

Standards and certifications

5.2.5 DNV GL certification

The following table lists the revisions from which DNV GL certification applies to individual components.
Model number Description
5APC3100.KBU0-000 APC3100 system unit - Intel Celeron 3965U 2.2 GHz - Dual core
5APC3100.KBU3-000 APC3100 system unit - Intel Core i7 7600U 2.8 GHz - Dual core
5MMDDR.4096-04 SO-DIMM DDR4, 4096 MB
5MMDDR.8192-04 SO-DIMM DDR4, 8192 MB
5MMDDR.016G-04 SO-DIMM DDR4, 16384 MB
5CFAST.016G-00 CFast 16 GB SLC
5CFAST.032G-00 CFast 32 GB SLC
5CFAST.032G-10 CFast 32 GB MLC
5CFAST.064G-10 CFast 64 GB MLC
5CFAST.128G-10 CFast 128 GB MLC
5CFAST.256G-10 CFast 256 GB MLC
5CFAST.4096-00 CFast 4 GB SLC
5CFAST.8192-00 CFast 8 GB SLC
5AC901.I485-00 Interface card - 1x RS232/422/485 interface - For APC910/PPC900/APC3100/PPC3100
5AC901.ICAN-00 Interface card - 1x CAN interface - For APC910/PPC900/APC3100/PPC3100
5AC901.IETH-00 Interface card - 1x ETH 10/100/1000 - For APC910/PPC900/APC3100/PPC3100
5AC901.IPLK-00 Interface card - 1x POWERLINK interface - 2 MB SRAM - For APC910/PPC900/APC3100/PPC3100
5ACCFF01.0000-000 APC3100 front cover - Orange - With B&R logo
5ACCFF01.0000-001 APC3100 front cover - Dark gray - Without logo
5ACCFF01.0000-002 APC3100 front cover - Orange - Without logo
5ACCBC01.0000-000 APC3100 key cover - Orange
5ACCBC01.0000-001 APC3100 key cover - Dark gray
0TB103.9 Connector 24 VDC - 3-pin female - Screw clamp terminal block 3.31 mm²
0TB103.91 Connector 24 VDC - 3-pin female - Cage clamp terminal block 3.31 mm²
0TG1000.01 Technology Guard (MSD)
0TG1000.02 Technology Guard (HID)
DNV GL certificates with specifications for permitted ambient conditions are available on the B&R website at
loads - Certificates - Maritime - DNV
Certificates for compass safe distance are available at
210
Products with this certification are certified by the classification society DNV GL and
are suitable for the maritime sector. DNV GL certificates (type approval) are generally
accepted by other classification societies during ship acceptance procedures.
DNV GL per standard DNVGL-CG-0339 from November 2016
IACS E10
EN 60945 section 1c
These products are suitable for the following DNV GL environmental
conditions (DNV GL classes):
Temperature B
Moisture B
Vibration A
EMV B
Housing For onboard installation, the regulations for compliance with the
required degree of protection must be observed.
Products used on a ship's bridge must be dimmable using software in accordance
with the regulations and guidelines from the respective classification society.
GL.
Downloads - Certificates - Maritime - Compass safe
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
Revision
B8
B8
C0
C0
C0
D0
D0
D0
D0
D0
C0
D0
D0
D0
D0
BA
C0
C0
C0
C0
C0
C0
D0
D0
C0
C0
Down-
distance.