Software
4.3.2 UEFI RAID
4.3.2.1 Configuring a SATA RAID volume using the internal RAID controller
The following software description applies to the internal RAID controller on Kabylake-U chipset.
Information:
B&R recommends using only the same drive type in the SATA RAID volume.
Caution!
The maximum number of possible write cycles must be taken into consideration when setting up a
RAID volume with CFast cards with MLC technology.
Use submenu "Intel(R) Rapid Storage Technology" to navigate to the configuration of the RAID volume.
The following keys can be used in the device manager:
Key
Cursor (↑, ↓)
Enter
ESC
4.3.2.2 Create RAID volume
RAID volumes can be created via submenu
Technology" on page
137.
186
Figure 58: Device manager
Function
Navigation in the menu and between objects.
Selects an item or opens a submenu
Exits.
Table 214: Keys in the device manager
"Create RAID volume" on page 138
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
in section
"Intel® Rapid Storage