B&R Automation PC 3100 User Manual page 144

Software
4.1.7.2.1.2 H2OUVE
BIOS parameter
H2OUVE support
1)
1) Highway to Operating System UEFI Variable Editor
4.1.7.2.1.3 Baseboard
BIOS parameter
Product name
Serial number
Device ID
Vendor ID
Compatibility ID
HW revision
Parent device ID
Parent comp. ID
Power on cycles
1)
Power on hours
Battery voltage
Battery state
Temperature 1
Temperature 2
Temperature 3
Temperature 4
1) Each start/restart increases the value by 1.
4.1.7.2.1.4 Interface slot n
A total of 3 interface option slots are available. They are indexed from 1 to 3.
BIOS parameter
Product name
Serial number
Device ID
Vendor ID
Compatibility ID
HW revision
FW version
1)
Parent device ID
Parent comp. ID
Power on cycles
Power on hours
Temperature q
3)
1) For graphics options only.
2) Each start/restart increases the value by 1.
3) Depending on the IF option card, the number of temperature sensors varies from 0 (parameter not displayed) to 4.
4.1.7.2.1.5 Panel settings
BIOS parameter
Panel n
1)
1) The number of panels varies by system and system configuration (see submenu "Panel n" for reserved indices).
Panel n
The panel on the SDL/DVI-D interface of the APC3100/PPC3100 is indexed as panel 0.
If the APC3100/PPC3100 is also equipped with a graphics option in the IF option 3 slot, the associated panel is
assigned index 8.
144
Setting options Description
Disabled Disables/Enables H2OUVE support
Enabled
Table 160: Advanced - OEM features - H2OUVE
Setting options Description
- Displays the B&R model number of the mainboard
- Displays the B&R serial number of the mainboard
- Displays the device ID of the mainboard
- Displays the vendor ID of the mainboard
- Displays the compatibility ID of the mainboard
- Displays the hardware revision of the mainboard
- Displays the parent device ID of the mainboard
- Displays the parent compatibility of the mainboard
- Displays the power-on cycles of the mainboard
- Displays the operating time [h] of the mainboard
- Displays the battery voltage [V]
- Displays the battery state
- Displays the current temperature at sensor 1 [°C and °F]
- Displays the current temperature at sensor 2 [°C and °F]
- Displays the current temperature at sensor 3 [°C and °F]
- Displays the current temperature at sensor 4 [°C and °F]
Table 161: Advanced - OEM features - Baseboard
Setting options Description
- Displays the B&R model number of IF option n
- Displays the B&R serial number of IF option n
- Displays the device ID of IF option n
- Displays the vendor ID of IF option n
- Displays the compatibility ID of IF option n
- Displays the hardware revision of IF option n
- Displays the firmware version of IF option n
- Displays the parent device ID of IF option n
- Displays the parent compatibility ID of IF option n
- Displays the power-on cycles of IF option n
- Displays the operating time [h] of IF option n
- Displays the temperature at sensor q [°C and °F]
Table 162: Advanced - OEM features - Interface slot n
Setting options Description
Enter Opens menu
Table 163: Advanced - OEM features - Panel settings
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
2)
"Panel n" on page 144