B&R Automation PC 3100 User Manual page 218

Accessories
Model number
Connection cross section
AWG wire
Wire end sleeves with plastic covering
Solid wires
Fine strand wires
With wire end sleeves
Tightening torque
Electrical characteristics
Nominal voltage
Nominal current
4)
Contact resistance
Operating conditions
Pollution degree per EN 61131-2
1) Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2) Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the
product family.
3) The cage clamp terminal block cannot be used side by side.
4) The respective limit data of the I/O modules must be taken into account!
218
0TB103.9
26 to 14 AWG
0.20 to 1.50 mm²
0.4 Nm
Table 226: 0TB103.9, 0TB103.91 - Technical data
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
0TB103.91
26 to 12 AWG
0.20 to 1.50 mm²
0.20 to 2.50 mm²
0.20 to 2.50 mm²
0.20 to 1.50 mm²
-
300 V
10 A / contact
≤5 mΩ
Pollution degree 2