B&R Automation PC 3100 User Manual page 142

Software
4.1.7.2.1 OEM features
BIOS parameter
BIOS version
MTCX version
Realtime environment
Automatic firmware update
Super IO
H2OUVE
Baseboard
Interface slot n
1) 2)
Panel settings
SSD monitoring service
Custom boot logo
1) A total of 3 interface option slots are available. Slot IF option 3 is reserved for graphic interfaces.
2) Unused interface option slots are not displayed.
If no IF option slot is used, this submenu is not available.
4.1.7.2.1.1 Super IO
BIOS parameter
CAN device
COM A
Base I/O address
142
Figure 35: Advanced - OEM features
Setting options Description
- Displays the BIOS version
- Displays the MTCX version
Disabled Disables/Enables the real-time environment
This must be enabled for real-time operating systems such as Automation Runtime.
Enabled
Disabled Disables/Enables automatic firmware updates for the mainboard, SDL and SDL4 cards
Enabled
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Table 157: Advanced - OEM features
Setting options Description
- Indicates whether a CAN interface (IF option) is installed
Disable Disables/Enables COM A (SDL onboard touch screen)
Enable
0x2E8 Selects the I/O address for COM A
0x2F8
0x338
0x378
0x3E8
Table 158: Advanced - OEM features - Super IO
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
"Super IO" on page 142
"H2OUVE" on page 144
"Baseboard" on page 144
"Interface slot n " on page 144
"Panel settings" on page 144
"SSD monitoring service" on page 145
"Custom boot logo" on page 145