B&R Automation PC 3100 User Manual page 162

Software
4.1.7.2.9 PCH-IO configuration
BIOS parameter
PCI Express configuration
SATA and RST configuration
Security configuration
HD audio configuration
PCH LAN controller
DeepSx power policies
LAN wake from DeepSx
Wake on LAN enabled
SLP_LAN# low on DC power
Port 61h bit-4 emulation
State after G3
Numlock
Screenshot function
Shell startup script delay
162
Figure 43: Advanced - PCH-IO configuration
Setting options Description
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Disabled Disables/Enables PCH LAN controller
Enabled
Disables/Enables DeepSx power policies
Disabled
Enabled in S4-S5
Disabled Disables/Enables LAN wake from DeepSx
Enabled
Disabled Disables/Enables wake on LAN enable
Enabled
Disabled Disables/Enables SLP_LAN# low on DC power
Enabled
Disabled Disables/Enables port 61h bit-4 emulation
Enabled
S0 state Working
S5 state Soft off
Off Disables/Enables the numeric keypad during booting
Enables BIOS input via the numeric keypad of a keyboard.
On
Disabled Disables/Enables the screenshot function
This function is only available in BIOS and cannot be used in operating systems.
Enabled
Screenshots are stored in BMP format and named using the capture time (yyyymmd-
dhhmmss).
INT Defines the shell startup script delay time [s]
Default: 3 Range: 0 to 10
Table 188: Advanced - PCH-IO configuration
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
"PCI Express configuration" on page 163
"SATA and RST configuration" on page 165
"Security configuration" on page 166
"HD audio configuration" on page 166
Selects the state after G3
Defines how to proceed after "mechanical off" (G3).
S0 or S5 after G3