B&R Automation PC 3100 User Manual page 177

4. After booting the EFI shell, "startup.nsh" is executed and the UEFI BIOS upgrade is started.
Information:
With an "Extended" update (e.g. Intel ME firmware), several reboots are necessary.
The instructions during the update process must be followed until the upgrade installation is
completed with the message "BIOS update done".
5. After a successful upgrade, the system must be rebooted.
6. Reboot and press "Esc", "Del" or "F2" key to enter the UEFI BIOS Setup menu and load the setup defaults;
then select "Save changes and exit".
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
Software
177