Evaluating With The Burnintest Tool From Passmark - B&R Automation PC 3100 User Manual

Commissioning

3.5.2.2 Evaluating with the BurnInTest tool from PassMark

If a separate application is not created or used for temperature evaluation, B&R recommends using the BurnInTest
software tool from PassMark.
The BurnInTest software tool is available in standard and professional versions. In addition to the software package,
various loopback adapters (serial, parallel, USB, etc.) and test CDs or DVDs are also available. Depending on the
expansion level of the software and available loopback adapters, a correspondingly high system and peripheral
load can be generated.
Information:
Loopback adapters are also available from PassMark. For more information, see www.passmark.com.
The following screenshots are based on PassMark BurnInTest Pro V7.1 using an APC3100 without IF options.
Figure 27: Settings for PassMark BurnInTest Pro V7.1 using an APC3100 without IF options
Depending on the availability of the loopback adapters and DVDs, appropriate fine tuning must be carried out in
the respective test properties.
130
Figure 28: Test overview of an APC3100 without IF options
Automation PC 3100 User's manual V 1.00 Translation of the original documentation