Servicing, Disturbances And Disassembly - B&R Automation PC 3100 User Manual

Standards and certifications
Danger !
Risque d'explosion – Ne pas connecter ou déconnecter un quelconque équipement lorsque le circuit
est sous tension, à moins que la zone soit connue comme étant sans risque et sans concentrations
inflammables!
Risque d'explosion – Le remplacement de composants peut compromettre l'aptitude au respect de la
Classe I, Division 2!
With the exception of USB dongle 0TG1000.01 or in accordance with the requirements listed in
with the Automation PC 3100"
not certified for operation in potentially explosive areas and are only permitted to be used for service purposes.

5.2.6.4 Servicing, disturbances and disassembly

Devices must be taken out of operation and protected against accidental startup. The actual disconnection of the
power supply must be checked with a suitable voltmeter.
Before removing or installing accessories, components or cables, the power supply to APC3100 systems and
power supplies must be interrupted. Defective devices are only permitted to be replaced by trained personnel.
Before switching on or connecting to the power supply, all covers or components of the system must be refitted
and secured.
Danger!
Failure to follow this instruction can result in death, serious bodily injury or damage to property!
Danger !
Le non-respect de ces instructions peut entraîner des blessures graves ou mortelles!
212
and "USB connection with optional DisplayPort graphics
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
"USB connection
option", USB interfaces are