5Ac901.Iplk-00 - B&R Automation PC 3100 User Manual

Technical data

2.3.5.7 5AC901.IPLK-00

2.3.5.7.1 General information
Interface option 5AC901.IPLK-00 is equipped with 1 POWERLINK interface and 2 MB SRAM.
• 1x POWERLINK interface managing or controlled node
• 2 MB SRAM
• Compatible with APC910/PPC900 and APC3100/PPC3100
Interface option 5AC901.IPLK-00 can only be operated in the IF option 2 slot.
Information:
When writing, reading or accessing the SRAM, "unaligned accesses" are not supported by the Avalon
bus (internal bus in the PCI Express core).
2.3.5.7.2 Order data
Model number Short description
Interface options
5AC901.IPLK-00 Interface card - 1x POWERLINK interface - 2 MB SRAM - For
APC910/PPC900/APC3100/PPC3100
2.3.5.7.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
General information
B&R ID code
Diagnostics
Data transfer
Certifications
CE
UL
HazLoc
DNV GL
Controller
SRAM
Size
Battery-backed
Remanent variables in power failure mode
Interfaces
POWERLINK
Quantity
Transfer
Type
Design
Transfer rate
Cable length
Electrical characteristics
Power consumption
86
Table 98: 5AC901.IPLK-00 - Order data
Class I, Division 2, Groups ABCD, T4
(for e.g. Automation Runtime, see Automation Help)
Max. 100 m between two stations (segment length)
Table 99: 5AC901.IPLK-00 - Technical data
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
Figure
5AC901.IPLK-00
0xE025
Yes, using LED status indicator
Yes
cULus E115267
Industrial control equipment
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
1)
Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: A (0.7 g)
EMC: B (Bridge and open deck)
2)
2 MB
Yes
256 kB
1
100BASE-TX
Type 4
3)
RJ45, shielded
100 Mbit/s
1.5 W