Operation Setting Screen Of Calibration Range - Fuji Electric ZKME Instruction Manual

10.2.10 Operation setting screen of calibration range

Description
 During calibration, you can select single or common range for the calibration factor using this
function.
 Settable range: Select one of the following.
(1) "Range interlock": Performs calibration of the range that is currently displayed
(2) "Display range":
Operation
(example)
Key operation
(1)
(2)
(3)
(4)
and sets the calibration factors of the other ranges to the same
value as above.
Performs calibration of the range that is currently displayed.
Setting the calibration range to range interlock
Display the screen on the right in accordance with the key
operation summary and press the
The operation setting screen of calibration range appears.
Use the key to select the range interlock.
Press the key to set the value.
Press the key.
When it is fixed, the display returns to the screen on the right.
Description
key.
- 62 -
Displayed message
(LCD)
CALIBRATION MENU
CURRENT
ABOUT CAL. RANGE
BOTH CURRENT
ABOUT CAL. RANG
BOTH
CALIBRATION MENU
CURRENT
INZ-TN1ZKME-E