Selection Of Alarm Contact Output - Fuji Electric ZKME Instruction Manual

10.5.3 Selection of alarm contact output

Description
 You can set the alarm conditions for alarm contact output using this function.
 Settable range: Select one of the following.
(1) [ALARM NONE] : Alarm contact output is not performed.
(2) [HIGH ALARM]
(3) [LOW ALARM]
(4) [HH ALARM]
(5) [LL ALARM]
(6) [H/L ALARM]
(7) [HH/LL ALARM] : Alarm contact output is performed when an HH or LL limit
Operation
(example)
Key operation
(1)
(2)
(3)
(4)
(5)
: Alarm contact output is performed when an high limit
: Alarm contact output is performed when an lower limit
: Alarm contact output is performed when an HH limit alarm
: Alarm contact output is performed when an LL limit alarm
: Alarm contact output is performed when an high or lower
Setting the lower limit alarm function for alarm contact output
Display the screen on the right in accordance with the key
operation summary and press the
The selection of alarm contact output setting screen appears.
Use the key to select the low alarm.
Press the key to set the value.
Press the key.
The display returns to the screen on the right.
alarm occurs.
alarm occurs.
occurs.
occurs.
limit alarm occurs.
alarm occurs.
Description
key.
- 86 -
Displayed message
(LCD)
PARAMETER MENU
DO ALARM SET
DO ALARM SET
ALARM NONE
DO ALARM SET
LOW ALARM
DO ALARM SET
LOW ALARM
PARAMETER MENU
DO ALARM SET
INZ-TN1ZKME-E