Check The Contents Of Display; Check Of State Information - Fuji Electric ZKME Instruction Manual

The condition of the unit is displayed on the left of the LCD with three letters. The maximum of three items
are displayed on one display. If there are four or more items, "▼" is displayed at the bottom of the screen.
Scroll the screen with the
The unit displays the following three pieces of information:
 (1) Condition information ("6.4.1"), (2) Error information ("6.4.2"), (3) Alarm information ("6.4.3")

6.4.1 Check of state information

Display
message
WUP Warm-up
CAL Auto calibration
S Span calibration
Z Zero calibration
SCK Sensor check
SRC Sensor recovery
BLW Automatic blowdown
RIC Rich mode
KYL Key Lock
RHO Remote heater is off.
RCP Remote calibration is prohibited. Displayed while remote calibration is prohibited.
RAH Remote analog output hold
RCL Remote calibration
RBL Remote blowdown
INZ-TN1ZKME-E

6.4 Check the contents of display

key to display the fourth and subsequent items.
State
Appears during warm-up
Appears during auto calibration
Displayed together with "CAL" or "RIC" during span
calibration.
Displayed together with "CAL" or "RIC" during zero
calibration.
Displayed during sensor check.
Displayed during sensor recovery.
Displayed during automatic blowdown.
Combustion efficiency option
Displayed when electromotive force is 200mV but no
more than 260mV
Displayed during key lock
Displayed while remote heater is off.
Displayed during remote analog output hold.
Displayed during remote calibration.
Displayed during remote blowdown.
- 29 -
Remarks