Setting Of Hold Setting Value (Maintenance Hold) - Fuji Electric ZKME Instruction Manual

10.5.11 Setting of hold setting value (maintenance hold)

Description
 Using this function, you can set the output value of analog output signal to an arbitrary value when the
analog output hold function (maintenance hold) is enabled.
This function is to set the output value of an analog output at a percentage (%) of the full-scale value,
when "setting value" is selected and specified on the "10.5.10 Hold value setting (maintenance
hold)."
 Settable range: 0 to 100 %
Operation
(example)
Key operation
(1)
(2)
(3)
(4)
(5)
INZ-TN1ZKME-E
Setting the output value of analog output hold to "000%"
Display the screen on the right in accordance with the key
operation summary and press the
Press the key to display the screen on the right and press
the key.
The hold setting value setting screen appears.
Use the and key to set the hold value.
Press the key to set the value.
Press the key.
The display returns to the screen on the right.
Description
key.
- 95 -
Displayed message
(LCD)
PARAMETER MENU
AO HOLD (MAINTE)
AO HOLD (MAINTE)
HOLD VALUE
HOLD VALUE
000 %
HOLD VALUE
000 %
AO HOLD (MAINTE)
HOLD VALUE