How To Change The Setting; How To Change The Setting Of Converter Zkm Depending On Detector Type - Fuji Electric ZKME Instruction Manual

11. HOW TO CHANGE THE SETTING

11.1 How to change the setting of converter ZKM
You do not need to change the setting of the converter for ZFK2 (thermocouple R).
The detectors for ZFK5 and thermocouple K cannot be used.
If you need to change the setting, please contact our service representatives.
Note
A wrong operation may alter the factory-adjustment value to disable measurement. Therefore,
carry out operations while observing the cautionary instructions.
depending on detector type
- 106 -
INZ-TN1ZKME-E