Setting And Operating Of Parameter; Measured Menu; Display Range Setting Screen - Fuji Electric ZKME Instruction Manual

10. SETTING AND OPERATING OF PARAMETER

10.1.1 Display range setting screen

Description
 You can set the display range of oxygen concentration value using this function.
 Settable range: Select one of the following
(1) "Range 1": Displayed in the range set in the range setting 1.
(2) "Range 2": Displayed in the range set in the range setting 2.
Operation
(example)
Key operation
(1)
(2)
(3)
(4)
Note
 If "Range setting" is set in the contact input setting, you cannot change the display range on this
screen.
INZ-TN1ZKME-E

10.1 Measured menu

Setting the display range to "Range 1"
Display the screen on the right in accordance with the key
operation summary and press the
The display range setting screen appears.
Use the key to select the range-1.
Press the key to set the value.
Press the key.
When it is fixed, the display returns to the screen on the right.
Description
key.
- 49 -
Displayed message
(LCD)
MEASURE MENU
OUTPUT RANGE
OUTPUT RANGE
RANGE1 RANGE2
OUTPUT RANGE
RANGE1
MEASURE MENU
OUTPUT RANGE