Date And Time Setting Of Automatic Blowdown - Fuji Electric ZKME Instruction Manual

10.3.2 Date and time setting of automatic blowdown

Description
 You can set the date and time for starting automatic blowdown using this function.
Automatic blowdown is performed in a specified cycle from a specified date and time.
 If it is invalid, automatic blowdown does not start at a specified date and time.
 Settable range: date and time in the future in the calendar
Operation
(example)
Key operation
(1)
(2)
(3)
(4)
(5)
Note
 You cannot change the setting value during automatic blowdown or remote blowdown.
 Check that "Current date and time setting" in the parameter menu is properly set.
Setting the date and time for starting automatic blowdown to 13:00, 08/02/25
Display the screen on the right in accordance with the key
operation summary and press the
Press the key.
The date and time setting of automatic blowdown screen
appears.
Use the and key to set the automatic blowdown
starting date and time screen.
Press the key to set the value.
Press the key.
The display returns to the screen on the right.
Description
key.
- 64 -
Displayed message
(LCD)
BLOW DOWN MENU
SET AUTO BLOW
SET AUTO BLOW
START DATE
START DATE
08/02/25 13:00
START DATE
08/02/25 13:00
SET AUTO BLOW
START DATE
INZ-TN1ZKME-E