10.2.9 Calibration error clear
Description
You can clear the errors occurred during calibration using this function.
If an error occurs during calibration, an error display (Er4, Er5) and abnormal contact output (close)
continues until the next calibration is properly completed.
Clear the error display on the measurement screen and open the abnormal contact output.
Error log information is not cleared.
Operation
(example)
Key operation
(1)
(2)
(3)
(4)
INZ-TN1ZKME-E
Clearing a calibration error
Display the screen on the right in accordance with the key
operation summary and press the
The calibration error clear screen appears.
Press the
key.
(The calibration error is not cleared yet.)
Press the
key.
(Calibration error cleared.)
The display returns to the screen on the right.
Description
key.
- 61 -
Displayed message
(LCD)
CALIBRATION MENU
CAL. ERROR CLEAR
CAL. ERROR CLEAR
YES
CAL. ERROR CLEAR
YES?
CALIBRATION MENU
CAL. ERROR CLEAR