Parameters; Description Of Display/Setting Unit; Display/Setting Unit - Fuji Electric FSZ Instruction Manual

3.1. Description of display/setting unit

The display/setting unit are shown below.

3.1.1. Display/setting unit

Name
UP key
DOWN key
Entry key
UP key +
Entry key
Diagnostic indicator lamp STATUS
Flow direction FLOW
Digit overflow display
Minus sign display
LED lamp
Unit display

3. PARAMETERS

Key Description
display
△
Use to select items, numeric values, and symbols.
Use to move the cursor.
▽
Use to select items, numeric values, and symbols.
Use to move the cursor.
○
Use to send one display item, confirm a selection, and register a setting.
Press the UP key while holding down the Entry key. Use to return one display
△＋○
item in the same hierarchy.
Displays the wave receipt error diagnosis.
(Green) wave receipt normal, (red) wave receipt abnormal
It displays the flow direction.
(Green) : Flow direction from right to left from the front of the flowmeter
(Green) : Flow direction from left to right from the front of the flowmeter
Displayed when there is digit overflow.
Displayed when the flow direction is reversed.
Displays measurement values and setting values.
4-digit 2-row 7-segment display, 1 to 3 decimal places
Displays the flow rate and total value switchover, as well as the flow rate unit.
Top (green): Liter (L)
Middle (green): Gallons (US gal)
Bottom (green): /min, ON: Flow rate display, OFF: Total value display
- 9 -