Table of Contents
Advertisement
4.1. Description on display/setting section
The display/setting section is illustrated below.
LCD
LED
Description of display/setting unit
○ LCD display: Displays the measurement and setting (indication in 16 digits, 2 line).
"Measurement display"
Display 1
Display 2
Display 1
Display 2
Display 1
Display 2 U
○ LED display: Indicates whether the received wave is normal or not.
(Green) : Received wave is normal.
(Red) : Received wave is abnormal.
Set the parameter by setting switches.
ESCAPE key : Return to the next-higher menu level or cancels the set status.
ESC
UP key
SHIFT key
ENTRY key : Enters a selection or registers a setting.
ENT
+
DOWN key : DOWN key function is conducted by holding down SHIFT key and press DOWN key.
- 12 -
4. PARAMETERS
Up to 8 digits including the decimal point are displayed in the data field. When the displayed
digits exceed, "<" is displayed at the first digit. When the range exceeds maximum or is
below minimum setting, "OVERFLOW" or "UNDERFLOW" is displayed blinking on the
Display 2.
Flow direction, during test mode "T"
Data
Data
Flow direction
Data
O
V E R
F
L O W
Data
N
D
E R
F
L O W
: Selects items, numeric values and symbols.
: Moves the cursor and selects decimal place.
Note) For changing the parameter, enter the changed value, and press this key to confirm
that it is registered.
Uses DOWN key for selecting the items, values and codes.
Unit
Unit
Unit
Unit
INF-TN3FLR-E
Advertisement
Table of Contents
