3.5.1 Power supply (standard terminals (1) - (2))
ing terminal (standard terminal (3)
M4) to connect the cables to the terminals.
assure safety.
ing electric equipment (such as high frequency furnace
avoiding noise.
In case noise may enter from a relay, solenoid valve, etc.
3.5.2 Measured value output signal (standard terminals (4) – (5))
•
•
3.5.3 Corrective input (optional terminals (3) – (4))
2
recommend you to isolate signals.
3.5.4 Contact input (optional terminals: DI1 (5) – (6), DI2 (7) – (8), DI3, (9) – (10))
•
• Don't apply voltage to terminals.
12
When noise source is in the vicinity
order placement.) Isolated output
) measured value is input.
4
-
ZAF power supply
or less
or more
Varistor or
spark killer
Locate and connect
in close proximity
Noise source
INZ-TN6ZAF-E
-