Interface Configuration Table - Cabletron Systems SPECTRUM FDM Manual

Community Table
This button opens the Community Table View. This view allows you to change
the community names for all MIB components on the device. For more
information on this view, refer to the SPECTRUM Portable Management
Application Tools Guide.
Interface Detail
This button opens the FDM Interface Detail View, described later in this
chapter.
Interface Configuration Table
The Interface Configuration Table provides the following port configuration
information for each of the FDM's bridging interfaces:
Update
This button updates all the information in the table.
MAC/Canonical
This button switches the Interface Address entries between the MAC and
Canonical addresses.
Set/Clear Filter
This button allows you to apply a specific filter to a column entry.
Sort Up/Down
This button allows you to arrange the display of information by a defined
parameter.
Interface Address
The Ethernet (MAC) address of the port.
Description
A textual description of the interface including the name of the manufacturer
and the product name.
Type
The type of hardware interface for the port. Possible interface types are: fddi
or ethernet-csmacd.
Oper Status
The State of the port (Up, Down, or Testing).
9030829 E5
FDM Device Configuration View
FDM Device Configuration View Fields
Configuration Views
4-3