Table of Contents
Advertisement
INTRODUCTION
We assume that you have a general working knowledge of Ethernet or
IEEE 802.3 type data communications networks and their physical layer
components.
1.2
GETTING HELP
If you need additional support related to Cabletron Systems' Local
Management for the IRM2, or if you have any questions, comments, or
suggestions concerning this manual, feel free to contact Cabletron
Systems' Technical Support at:
By phone
By CompuServe®
By Internet mail
1.3
ABOUT IRM2 LOCAL MANAGEMENT
The IRM2/LM provides unique management and control capabilities for
the IRM2 module. You can access Local Management either through a
VT™ 200 or 300 series terminal, or terminals running emulation
programs for these series terminals, or through a Hayes compatible
modem.
With IRM2 Local Management, you have the tools to manage the IRM2
and its attached segments. For example, you can enable and disable ports
and set device parameters such as IP address, SubNet Mask, Default
Gateway, current date and time, modem baud rate, statistical counters,
refresh time, and enable or disable factory default settings.
You can also use Local Management to view a full array of statistics to the
port level, including the number of:
bytes received
packets
received collisions
transmit collisions
OOW collisions
1-2
(603) 332-9400
Monday-Friday; 8am - 8 pm EST
GO CTRON from any !
support@ctron.com
runt packets
no resource errors
misaligned packets
CRC errors
giant packets
Advertisement
Table of Contents
