Ups; Accessing Fddi Management - Cabletron Systems 7C03 User Manual

Portable management application for the 7c03, 7c04, and 7c04-r smartswitch hubs
Hide thumbs Also See for 7C03:
Table of Contents

Advertisement

menu allows you to search for a specified MAC address on multiple devices
simultaneously; however, if you launch this tool from the Hub View or from the
command line, only the hub against which you launch the tool will be searched.
To launch the Global Find MAC Address tool from the Hub View:
1. Click on
2. Drag down to Find MAC Address, and release.
The Global Find MAC Address tool is described in detail in Chapter 12 of the
SPMA Tools Guide.

UPS

If either of the COM Ports on the 7X00 controller module has been configured for
UPS operation (see Configuring COM Ports,
include a selection that allows you to launch the UPS configuration tool.
To do so:
1. Click either mouse button in the Port Status or Port Index box for the COM
2. Drag down to UPS, and release.
If the COM port menu does not include the UPS selection, that COM port has not
yet been configured for UPS operation; see Configuring COM Ports,
for more information.
The UPS configuration tool is described in detail in Chapter 8 of the SPMA Tools
Guide.

Accessing FDDI Management

If you have any FDDI modules installed in your 7C0x SmartSwitch chassis, the
Module —> FDDI Utilities menu provides access to five applications that allow
you to monitor and manage your FDDI interfaces.
To access FDDI management applications:
1. Click either mouse button on the Module Index or Module Type box in the Hub
2. Drag down to FDDI Utilities, then across to select the FDDI management tool
Managing the Hub
to display the Device menu; note that this menu is the
same regardless of the Application Display mode currently in effect.
port you wish to configure; the COM port menu will be displayed. (Remember,
the COM port menus are available in all Application Display modes.)
View to display the Module menu. (Remember, the Module menu is available
in all Application Display modes.)
you need:
a. Port Configuration
b. Alarm Configuration
Using the 7C0x SmartSwitch Hub View
page
2-36), that port's menu will
page
2-36,
2-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

7c047c04-rSpectrum

Table of Contents

Save PDF