Siemens SIMATIC ET 200AL System Manual page 499

Configuration modes for digital inputs/outputs
3.2 Wiring
3.2.2 Pin assignment
Note
Color coding
The sockets for ET-Connection and the power supply of the modules are color-coded. These
colors correspond to the colors of the offered cables.
NOTICE
24 V encoder supply 1U
Use only the 24 V encoder supplies 1U
module to supply power to the encoder.
Pin assignment of the sockets for digital inputs/digital outputs in the configuration modes DIQ
and DIQ with value status
The tables below show the pin assignments of the 8 sockets for connection of the digital
inputs/digital outputs.
Table 3- 1
Pin
1
2
3
4
5
16
/ 2U
S S
Pin assignment for digital inputs/digital outputs
Assignment
X10 to X13 sockets for digital inputs / outputs
24 V encoder supply 1U
S
(derived from 1L+ non-switched)
Input/output signal DIQ : Connector X10
1
Input/output signal DIQ : Connector X11
3
Input/output signal DIQ : Connector X12
5
Input/output signal DIQ : Connector X13
7
Ground 1M
Input/output signal DIQ : Connector X10
0
Input/output signal DIQ : Connector X11
2
Input/output signal DIQ : Connector X12
4
Input/output signal DIQ : Connector X13
6
Functional earth FE
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
and 2U provided by the digital input/digital output
S S
Front view of the sockets
X10, X12
Equipment Manual, 08/2021, A5E38688112-AD
X11, X13